Key Fob Locks And Unlocks But Wont Start Car. However, when i try to lock the door from passenger side manually, it unlocks the door right away. If the vehicle still does not start and the message of needing the key is still present, then the ignition switch needs replaced.
My key fob unlocks the doors but won't start the vehicle. Using the remote key, put into door lock. Discussion starter · #1 · aug 30, 2016 this is on my 2013 gmc terrain.
It Should Be About $200 But Some Dealers Are Cheaper.
The problem has been for a few months. The object of these things is to rule out big sections of what could be wrong, so i will ask again anyway you can get some friends to push the car and you in 3rd gear with ignition on and clutch in.pop the clutch out once rolling fast and see if it will start. I tried a new battery and it didn't make any difference.
If You Need Further Assistance With Your Vehicle Not Registering The Key, Then Seek Out A Professional, Such As One From Your Mechanic, To Help.
The problem is in the keyless entry system, start button circuitry or possibly the engine computer. The car is a 2008 and i have the flip key mod. I have taken the car on a 100 mile drive to recharge but that also does not work.
If The Backup Remote Can Lock And Unlock The Door, You Will Know For Sure That There’s Something Wrong With The Main Remote.
Just one of these things being ajar or if the sensors for these are broken (won't register), the doors won't lock. Even if you normally use the button to unlock your car, there is often a physical key stored within the fob. How long have you had trouble locking the vehicle?
I Changed The Battery, And Still Get The Same Thing.
Before starting to diagnose the causes, you can use a backup key fob (if you have one) to see whether the problem is with the remote or the car door. Since then, i unlock with metal key, then start with key fob. Bad battery, circuit board original.
So I Have To Put The Key In The Door Lock To Unlock.
They can sell you a new key without touching the car. Hi all, just thought i would run this by the experts before i start digging into this, but as stated when i press the unlock button on my key fob the locks go up but when i press the lock button nothing happens unless i press button twice and the the horn beeps but locks do. What if my fob unlocks my car but won’t start it?